Home > Catalog

Showing 1–24 of 1325 results

Protective overalls DuPont Tyvek IsoClean, IC 193BWH DS (sterile)

822.00 

DuPont™ Tyvek® IsoClean® overalls with hood model IC193 B WH DS.

  • Available in sizes 2S to 7X.
  • Clean processed and gamma sterilized.
  • Stitched internal seams.
  • Elastic waist at back for a good fit.
  • Elastic thumb loops covered with Tyvek®.
  • Tunnel elasticity at wrists and ankles.
  • Front zip closure.
  • Storm valve.

The coverall provides the perfect balance of protection, durability and comfort. Made from high density polyethylene through a patented spinning process; Provides an internal barrier against particles, microorganisms and harmless splashes of light, water-based liquid. Tyvek® IsoClean® is also breathable and lint-free.

Garments and accessories made from purely processed and sterile Tyvek IsoClean are used in cleanrooms in the biotech, pharmaceutical, medical, food processing, cosmetics, and other critical or controlled environments.

Low shoes leather EXENA HELIOS S1P SRC

2,076.00 

Low shoes with composite toe cap and Kevlar anti-puncture insole
Protection class S1P SRC
Light weight, optimal fit and temperature control are the properties that define the improved EXENA X-LIGHT series of safety shoes. The dual-density polyurethane outsole with shock absorption and slip resistance ensures natural movement and stability when using the HELIOS S1P SRC low shoes.

Half mask EKASTU POLIMASK 100/2 Germany

476.16 

The half mask POLIMASK 100/2 protects the mouth, nose and chin. Equipped with two threaded filter connections of the 200 series (special thread ∅ 64 mm).

Features: the POLIMASK 100/2 half mask features a new body design made of skin-friendly EPDM material (a mixture of ethylene, propylene and acts on),
does not cause allergies or irritation, with a convenient fixation system on the head, easy to put on and take off.
Comfortable to use, has a great tight fit.
A wide, elastic internal seal guarantees high tightness (pressure coefficient 0.05%).
The special design provides a large field of view and low inspiratory resistance (<0.6 mbar inhalation, <1.2 mbar exhalation, at a rate of 160 l/min).
The visibility “dead zone” of the half mask is significantly lower than permissible limits and is resistant to high and low temperatures and humidity.
The size is adjustable with elastic rubber straps (for all types of faces).

Advantages: the half mask is equipped with a threaded filter connection that is convenient and practical for the user.
It is NOT recommended to use a filter weighing more than 300g.
Weight: 145g
Warranty period of storage is 5 years.
DSTU EN 140-2004

Half mask EKASTU POLIMASK 230 (for filters series 230) Germany

648.12 

The POLIMASK 230 half mask protects the mouth, nose and chin. Equipped with a threaded filter connection series 230 (special thread ∅ 94 mm).

Features: the POLIMASK half mask features a new body design made of skin-friendly EPDM material (a mixture of ethylene, propylene and acts on),
does not cause allergies or irritation, with a convenient fixation system on the head.
Comfortable to use, has a great tight fit.
A wide, elastic internal seal guarantees high tightness (pressure coefficient 0.05%).
The special design provides a large field of view and low inspiratory resistance (<1.2 mbar inhalation, <2.0 mbar exhalation, at a rate of 160 l/min).
The shape of the mask is designed in such a way that it is suitable for those who constantly wear glasses.
The size is adjustable with elastic rubber straps (for all types of faces).

Advantages: the half mask is equipped with a threaded filter connection that is convenient and practical for the user.
It is NOT recommended to use a filter weighing more than 300g.
Weight: 145g
Warranty period of storage is 5 years.

Low shoes EXENA MOON ESD S3 SRC

3,000.00 

UPPER MATERIAL:
Microsafe® technology.
Combination of microfiber, suede leather and special textile. Provide unsurpassed comfort, air exchange in combination with high mechanical durability. Waterproof impregnation.

LINING:
Textiles with high wear resistance and hygroscopicity;

SOLE:
Oil and petrol resistant (FO), anti-slip (SRC), anti-static sole of increased wear resistance from two-layer polyurethane (PU / PU). Impact energy absorption in the heel area 20 J.

TRAY:
Very light aluminum toe cap, impact resistance 200 J.

INSOLE:
Kevlar® skid plate (1500N)
Anatomical insole with memory effect

COLOUR:
Black top. The sole is light gray.

SIZE RANGE:
35-48

THE COUNTRY OF MANUFACTURE:
Italy

TRIARMA® PVC1380 BR-T PVC insulated gloves

213.00 

The gloves are coated with oil-resistant PVC and provide a secure grip. Resistant to oils, chemicals and microorganisms, liquids. They have a warm fleece acrylic and cotton lining, flexible to use. The acrylic substrate has good thermal insulation properties (cold insulation down to – 20°C). For those working in difficult, cold conditions. The gloves are wear-resistant. The length of the gloves is 30 cm, which allows you to protect part of the forearm.

Recommended for chemical processing, cold storage, oil refining, cold weather work, maintenance, petrochemicals, agricultural work, food processing.

EN 420; EN 388 (4121X); EN 511(021); EN ISO 374-5; EN ISO 374-1 Type B (AJK)

MATERIALS: PVC
LINING: fleece acrylic and cotton, yellow
COLOR: blue
LENGTH: 30 cm
SIZES: 10 (XL)

Gloves TRIARMA NM1355DF-HY/BLK acrylic, polyester with nitrile coating 3/4, insulated

138.00 

Gloves for protection against low temperatures.

The top layer is nylon class 13 bond, internal double acrylic class 7 bond, provide excellent thermal insulation and comfortable work in low temperatures, comfort temperature down to -20°C. and provides a comfortable temperature. Can be washed in a washing machine. Recommended areas of application: construction and installation work, automotive industry, oil refining, agriculture.

Protective properties DSTU EN 420:2017 (EN420:2003+A1:2009, IDT),
EN388:2017 (EN388:2016, IDT) - 3322X,
DSTU EN 511:2017 (EN 511:2006, IDT) – 02X.
Size XL(10), XXL(11)

Gas mask PSh-1S

12,000.00 

Insulating hose gas masks are designed to protect the respiratory system, eyes and facial skin from any harmful impurities in the air, regardless of their composition and concentration, as well as in working conditions in conditions of lack of oxygen in the air of the working area (less than 17%) or more. 0.5% of harmful vapor and gaseous substances. Used in various fields of civil industry, agriculture and public utilities for work in tanks, wells, compartments, cisterns, reservoirs and closed confined spaces.

PSh-1 gas masks are equipped with the following masks: ShMP-1, PPM-88 and MAG
Depending on the design of the air supply, they can be manufactured in non-pressure (self-priming) and pressure (forced air supply).

PSh-1S with an air hose 10 m long (in a bag with an enclosed hose) Self-priming (C).

Composition: BMP mask - 2 pieces, two series-connected corrugated tubes, to which a reinforced hose 10 m long is attached, a filter element for cleaning the air from inhaled dust, a safety belt with shoulder straps on which the hose is attached, a signal and rescue m and a pin, on which the end of the hose with a filter box and a storage bag are installed in the clean air zone.

Operating principle: breathable air is supplied under the front part from the clean area through an air hose while the worker is breathing. The duration of the protective action is unlimited.

Number of workers – 1 person.
Guaranteed shelf life – 3 years, rescue rope – 1 year.

Weight – 13 kg
DSTU EN 138-2002

Anti-noise inserts (earplugs) STARLINE SL1453-T with rope in a case, reusable (SNR-24 dB)

18.00 

Hypoallergenic inserts STARLINE SL-1453 on a textile cord in a case, reusable
Recommended for heavy traffic noise and machine shops
Can be used repeatedly due to the possibility of wet cleaning.
There is a special storage container and a removable textile cord (can be used without a cord).
Reduce noise level by 24 dB.

In production areas with high noise levels

Gas mask IZOD-2 NBC (GP7)

2,688.00 

A civilian version of a military gas mask.

Protection against chemical warfare agents.

The ISOD-2 NBC gas mask meets the requirements of DSTU EN 14387:2021 (EN 14387:2021, IDT), DSTU EN 136:2003 (EN 136:1998/AC:2003, IDT), provides human protection from organic gases and organic vapors with a boiling point > 65 °C, inorganic gases and vapors, sulfur dioxide, hydrogen chloride and other acidic gases and vapors. The Combination Particle Filter compartment removes harmful solid and liquid particles, biological solid and liquid aerosols, radioactive aerosols, dust, bacteria and viruses from passing air.

Low shoes leather EXENA TRASIMENO S1P SRC

934.46 

Suede low shoes with a metal toe cap and a steel anti-puncture insole
Protection class S1P SRC
Comfortable TRASIMENO S1P SRC low shoes made of suede with a two-layer polyurethane sole of the WORK series are designed for all types of activities. The ergonomic design of the sole and the SRC marking guarantee excellent anti-slip properties.

Dielectric mat RD Pro® 750x750 mm /20 kV/

579.00 

PURPOSE
Dielectric mats TM “RD Pro” are designed for individual protection against direct and alternating electric current and are an additional means of protection.
Used at voltages above 1 kV.

ADVANTAGES
They have a grooved front surface that prevents slipping.
The design of the rugs' cuts at an angle of 45° allows you to lay an unlimited number of rugs to create a solid and “impenetrable” covering of any area.

Low shoes EXENA TICINO S3 SRC

921.00 

UPPER MATERIAL
Genuine leather of the highest grade with waterproof impregnation.

LINING
Textile made of perforated material providing air exchange, resistance to abrasion and moisture absorption.

TRAY
Composite, impact resistance 200 J.

ANTI-PURGERY INSOLE
Kevlar® protective plate (Puncture resistance 1500N).

SOLE
Oil and petrol resistant, anti-slip (SRC), antistatic sole made of two-layer polyurethane.
Impact energy absorption in the heel area 20 J.
Temperature range from -20°С to +100°С

SIZE RANGE: 36-48

COUNTRY OF MANUFACTURER: Italy

Panoramic mask MPL mod. 4000 (cl. 1) (Spain) with bayonet connection

2,520.00 

The MPL 4000 Series reusable full face mask in high impact polycarbonate is designed for use with a dual bayonet filter (MPL Series B filters) and provides maximum comfort and durability combined with a light weight.

Together with the appropriate filters, the MPL full face mask provides protection against particles, gases and vapours, or a combination of both. Used in hazardous environments.

The 4000 series full face mask complies and is classified as class 1 (easy to use, thanks to a more comfortable breathing process through two filters) in accordance with the requirements of the Ukrainian and European standard DSTU EN 136:2003 (EN 136:1998, IDT) and classified as a means of individual protection (PPE) category III.

Filter MPL T29 K2P3R (with threaded connection)

708.00 

MPL T Series filters are versatile filters that provide protection against particles, gases and vapors, or a combination of both. Complies with the requirements of EN 143:2000/A1:2006 and DSTU EN 14387:2017 (EN 14387:2004+A1:2008, IDT).

Filter MPL T29 K2 P3 R (series T with threaded connection ∅ 40 mm) - protects against ammonia and organic derivatives of ammonia (K2), particles (dust, fibers, smoke, fog, microorganisms), R - reusable. The quality of the activated carbon used by MPL for gas and vapor filtration meets high safety standards, guaranteeing excellent filtration results.

The filter housing is made of lightweight impact-resistant ABS plastic. The filters connect directly to MPL full face masks with a 40mm threaded connection.

The filter is closed on both sides with covers to protect against moisture during storage.

Warranty period of storage: 5 years.

Country of origin: Spain.

Protective overalls TYVEK 600 Plus /CHA5/

422.88 

Protective overalls TYVEK 600 Plus /CHA5/ designed to protect against aggressive chemicals in low concentrations, disposable,
with a hood made of non-woven material, belonging to the 3rd class of chemical protection.

The coverall provides protection against radioactive particles, biological risk factors, and neutralizes static electricity charges. The hood does not obstruct the view, and the elastic insert at the waist contributes to a better fit at the waist of the suit and does not restrict movement.

Model description:
Protective flap for zipper and flap for fixing the mask
Elastic insert at the waist
Hood with elastic insert
Stitched and taped seams
Sleeve loops
Features of TYVEK Classic Plus:
Improved resistance to aggressive chemicals at low concentrations
Capable of retaining up to 99% solid particles larger than 1 µm
The hood provides freedom of movement of the head and good visibility
High strength zipper with protective flap
Cuffs on the sleeves and legs help to ensure the tightness of the product
Conforms to EN 14126, EN 1149-1 and EN 1073-2 standards

Shoes EXENA microfiber LILY_20 S1 SRC

1,260.00 

Microfiber Shoes with Composite Toe
Protection class S1 SRC
Thanks to the simulated microporous structure of microfiber, the LILY S1 SRC is highly breathable while repelling water. It is not afraid of dirt, salt, or other substances that can damage natural leather, so it tolerates regular machine washing without losing its protective properties, shape and color.,

Provide protection against general industrial pollution, static loads; mechanical impacts - impacts in the toe area (up to 200J), prevents the growth of bacteria, does not cause allergies and odor inside the shoe.

Recommended for workers in the electrical industry, food industry, health workers, laboratories and research institutes, the pharmaceutical industry and the biotechnology industry, the HoReCa and cleaning industry.

Protective goggles sealed STARLINE G-032A-C

240.00 

The G-032A-C goggles are designed to provide protection against medium energy impact hazards, mechanical hazards, ultraviolet, visible infrared, solar radiation and molten metal. The G-032A-C goggles also protect against liquids, small and large particles of dust, gas and hot solids. It is recommended for use in industrial production, laboratories, educational institutions in order to protect the eyes from hazards that can damage or impair vision.

MPL 3000C gas mask with T25 filter

3,390.00 

Spanish gas mask with a panoramic mask MPL 3000C and a combined filter MPL T25 ABEK2HgP3R (protection against organic gases and vapors (A), inorganic gases and vapors (B), sulfur oxides (E) and ammonia (K), mercury vapor, as well as dust (P3)).

Combined webbing belt /2PL-K/ TRIARMA /HT-322/

564.30 

Belt 2PL-K is a combination of strap and strapless belts, which achieves the versatility of the model. Designed for safe performance of work at height, including construction work in which there is a risk of falling, as a means of personal protection against falls from a height.

Belt 2PL-K is a combination of strap and strapless belts, which achieves the versatility of the model. The belt has a chest fastening point, and a fastening point behind the back.

Belt 2PL-K having a chest fastening point and a fastening point behind the back is ideal for high-altitude work of any complexity.

Goggles ROSOMZ closed with indirect ventilation ЗН62-Т GENERAL

147.48 

The glasses are modern and comfortable with high performance properties, mineral protective glasses, a rigid glass holder, a soft case made of PVC compound, four ventilation devices that provide effective ventilation and an elastic adjustable headband. The glass holder provides reliable fixation of protective glasses and enables their quick replacement. Protective glasses are distinguished by the stability of their optical properties over time and their very high resistance to scratches, abrasions and splashes of molten metal.

It is possible to use goggles with a respirator.

Glasses are equipped with safety glasses “triplex”, which provide eye protection from the impact of solid particles with a kinetic energy of at least 1.2 J.

RECOMMENDED:

for processing materials in especially difficult working conditions with the presence of free abrasive, stumps, riveting, chasing and cleaning castings, etc.;
for work on industrial installations;
for machine work, for work with electric and petrol tools;
for work with aggressive liquids, aerosols and vapors.
Perfectly processed (washed with water and soap).

APPLICATION: for reliable eye protection in difficult and traumatic working conditions in the metallurgical, machine-building, oil and gas processing and other sectors of the national economy of Russia and the CIS countries.

Goggles ROSOMZ ZNG1 sealed

147.48 

Protective goggles ROSOMZ sealed ZNG1 for work with aggressive and non-aggressive liquids, with mineral protective glasses, the most resistant to abrasive effects,
soft PVC body.

Eye protection against solid particles, splashes and vapors of acids, alkalis and organic solvents, as well as against hard abrasive particles.

Goggles for working with aggressive and non-aggressive liquids, with mineral protective glasses (see articles),
— the most resistant to abrasive effects;
- soft case made of PVC compound (ZNG1) or chemical resistant rubber (ZNG2);
- adjustable elastic head band made of oil and petrol resistant rubber;

Mineral safety glasses "triplex", glasses are equipped with a dropper bottle with anti-fogging liquid.
Lens marking: RZ 1 S 3 4 5 K

RECOMMENDED: for use with acids, alkalis, oils, greases and gasoline in combination with abrasives and solids.

Goggles ROSOMZ closed ZN4 ETALON (RS) with indirect ventilation

119.22 

Goggles ROSOMZ closed with indirect ventilation ZN4 ETALON (RS) with protective glass made of optically transparent material. Protection against mechanical damage by high-speed flying particles with medium-energy impact, resistant to solutions of chemical acids and alkalis. The glasses are made without metal parts, from materials that have ideal insulating properties and do not conduct electricity.

Glasses with protective glass made of optically transparent material. The glasses are made without metal parts, from materials that have ideal insulating properties and do not conduct electricity.

Type of glass: PC super with anti-fog coating on the inside, resistant to abrasion and scratching on the outside.
Type of ventilation: indirect - valves in the body, protect against flying particles in combination with dust, splashes. When welding, only goggles with indirect ventilation are used.

To protect the eyes from mechanical damage by chips and splinters flying off during machining of metals and other materials, particles of stone, ash, coal, splashes of building solutions, when working with pneumatic and power tools in conditions of high humidity, in the cold season, with increased physical loads