Mechanical belay device PROTEKT with steel cable 6 m / CR 220 06 // 5mm /
Mechanical device CR 220 06 is used for fall protection during work at heights in difficult conditions, outdoors, in confined spaces: hatches, tanks, wells, as well as during welding, work with aggressive substances.
|Discontinued from the range||
DSTU EN 360
|Fall Protection. Limiting fall||
Mechanical device CR 220 06 consists of:
fastening grip, which serves to attach it to the anchor point;
a rolling-braking mechanism with a shock-absorbing element in a reinforced plastic casing .;
steel cable made of stainless steel with a diameter of 5 mm and a carabiner. In addition, a break indicator is installed on the carabiner.
The length of the cable is automatically adjusted depending on the position of the worker. The brake mechanism is instantly activated when the speed of pulling the cable changes. The braking distance does not exceed 0.5 m.
The use of this device allows you to move freely and safely throughout the work site.
It is used for both vertical and horizontal belay (in this case, it is additionally equipped with an AZ 800 steel sling with a diameter of 8 mm with a fall safety shock absorber).
The permissible period of using the device is not limited, provided that periodic (once a year) technical inspections are carried out in a timely manner.
Available cable length:
6 m (5.1 kg);
8 m (5.3 kg);
10 m (5.5 kg);
11 m (5.9 kg).