Device for lifting and lowering loads PROTEKT / TU 413 /
The device for lifting and lowering loads PROTEKT / TU 413 / can be used in forest arboristics (cutting down sectional trees) and lifting loads.
|Discontinued from the range||
|Fall Protection. Limiting fall||
|Fall Protection. Positioning||
The device for lifting and lowering loads PROTEKT / TU 413 / can be used in forest arboristics (cutting down sectional trees) and lifting loads. The device is designed for lifting and lowering loads. The device is not intended for use as personal fall arrest equipment.
The block roller TU 413 consists of the following elements:
a) upper rope block with two wheels
b) lower rope block with one wheel
c) connector for fixing the end of the working rope with the lower block (sold separately)
d) work rope (sold separately)
Both upper and lower units are made up of fiberglass-reinforced plastic wheels with ball bearings connected to galvanized steel plates. Axles and connectors (bolts, nuts, washers) are made of galvanized steel.
Each block is equipped with an aluminum alloy swivel joint. The upper hinge of the block can be additionally rotated relative to the block itself.
Gear Ratio: 3: 1
Safety factor: 5: 1
Breaking load: minimum 50 kN
Cord diameter: 12mm
Working load: up to 10 kN
Weight: 2.47 kg