Half mask “Poplar” Е1Р1
Designed to protect the respiratory system from acid gases at concentrations not exceeding the MPC by more than 15 times and a volumetric oxygen content of at least 18%. Protects against substances such as: hydrogen chloride, hydrochloric acid vapors, sulfur dioxide, etc. Has an additional filter to protect against dust.
The respirator consists of a rubber half mask, a knitted seal (or without it), a headband and two replaceable filters containing a specialized absorber (sorbent) to protect against acid gases. The cartridges are equipped with P1 filters to protect against aerosols in the form of dust, smoke or fog at concentrations not exceeding 200 mg / m3.
– the use of highly effective sorbents can significantly increase the time of protective action.
– the presence of replaceable dust filters, allows you to fully use the resource of the sorbent (activated carbon).
– the sorbent is filled with gravity, which increases the time of the protective action of the cartridge by 20% in comparison with analogues.
– all parts of the cartridges are made of plastic, which makes them easy to dispose of through recycling.
|Protection against chemicals||
|Discontinued from the range||
|Защита от газа и пара||